Home | Profile | Why Us | Applications | Industries We Serve | Contact Us | Enquiry |
|
|
Transmission Belts |
We, Golden Machinery Store Company, are an
authorized distributor of Friction surface transmission belts
manufactured from the best quality raw materials. They pass through
double quality checks, the first one at the manufacturer's end, and the
second one in our Quality Control Laboratory that is equipped with
imported Test Machines. Under the supervision of highly qualified and
experienced team of Engineers and Technologists, we make sure to meet
all the customer's demand. The transmission belts are fabricated with multiple plies of specially woven fabrics with sufficient tensile strength both in the warp and weft directions. The cotton ducks (fabrics) are completely impregnated with specially formulated rubber compounds to get the best ply-to-ply adhesion and excellent flex life in actual service. The requisite number of plies are built-up together, pre-stretched, and vulcanized in stretched condition by the manufacturers. This process eliminates excessive stretch in service. The edges of belts are sealed with special bonding solution to prevent ingress of moisture and fraying of the edges. The belts vary in quality in terms of the type of fabrics, number of plies and widths etc. they are designed to meet customer's industrial needs and service requirements. Here are some of the types of transmission belts with their general specifications- |
|
Transmission Belting: Product
Spectrum
Range of Transmission Beltings
|
Thickness of Oriental Transmission Belting
Belts with Other Specifications As per our customers' requirement regarding the fabrics used for the conveyor belt production (100% synthetic and/or cotton/nylon (mixed yarn)), we can supply transmission belts in any quantity and to any destination. Pulley Diameters Load transmission capacity of belt is directly proportional to its speed. Large diameter pulleys with increased surface speed and consequently high load capacity (of the belts), give a greater safety to the outer plies of the belts from the effect of excessive stress and also help to regulate the load throughout the cross section of the belt. Recommended Minimum Pulley Diameter For given belt speeds and number of plies of belt in mm.
Width of the Pulleys Pulley should be wider than the belt width as per following recommendations:
Pulley Camber The Pulley should be crowned or cambered to compensate for slight mis-alignment and to ensure that the belt rides centrally. The crowing of pulleys should be as per relevant IS specification. |
|